Enclosed ventless fryers from Hudson, Massachusetts, with countertop, floor and PRO oil-filtration models.

AutoFry

AutoFry is the enclosed, automated fryer brand made by Motion Technology, Inc. in Hudson, Massachusetts, USA. MTI dates its ventless equipment business to 1990, with the single-basket FFG-10 among its earliest machines. The idea addressed a practical obstacle for food businesses: how to add fried foods where a conventional open fryer and an external hood were difficult to accommodate.

Manufacturing remains part of that identity. MTI states that AutoFry is built in Hudson using American steel and labour, and lists its business address at 1 Bonazzoli Avenue. From this Massachusetts base, the range has grown to serve bars, cinemas, convenience stores, concessions and restaurants. Its appeal lies in fitting a defined cooking process into a self-contained appliance, with models sized for different spaces and levels of demand.

During normal cooking, food enters through a loading chute, fries inside the enclosure and is delivered to an external receiving tray. The internal air system uses a grease baffle, mesh filtration and charcoal filtration; built-in ANSUL fire suppression adds another part of the design. Ventless operation still requires correct installation, clearances, maintenance and approval for the intended location.

MTI added Simplifry in 2007. This control system monitors the drop in oil temperature when food is loaded and adjusts cooking time to compensate. Programmable settings help operators repeat a selected process, but the food, batch size and cooking programme still need to be matched. Oil care and staff training remain essential to consistent results.

The current line includes the MTI-5 and MTI-5LV, the MTI-10X family, the Mini-C and the MTI-40C, alongside floor-standing MTI-40E models. Mini-C offers two independently operated baskets in a countertop format. The larger MTI-40E has two separate frying chambers, allowing operators to run each side independently. Check each model's electrical version, capacity and footprint instead of treating the range as interchangeable.

The newer MTI-10X PRO and MTI-40E PRO extend automation into oil management, adding integrated filtration and replenishment. This is distinct from the air filters that make ventless frying possible. Separate AutoFilter and OFS equipment provide other oil-maintenance options, with compatibility dependent on the fryer and oil used. ChefStop can help compare the available configurations, accessories and installation requirements before ordering.

Since 1990
Motion Technology's history in ventless foodservice equipment.
Hudson, Massachusetts
AutoFry manufacturing location identified by MTI.
Simplifry: 2007
Introduction of time and temperature compensation controls.
Two PRO formats
MTI-10X PRO and MTI-40E PRO include integrated oil management.
AutoFry
AutoFry
AutoFry
AutoFry
Enclosed ventless cooking

AutoFry combines an enclosed cooking chamber with internal air filtration. Confirm the selected unit's installation, clearance and local approval requirements before use.

Simplifry time compensation

Introduced in 2007, Simplifry adjusts cooking time in response to the oil-temperature drop after loading. Match the settings and batch size to the food being prepared.

Three-stage air filtration

A grease baffle, mesh filter and charcoal filter support recirculating operation. Regular cleaning and filter changes are required; oil filtration is a separate function.

Integrated fire suppression

AutoFry incorporates an ANSUL fire-suppression system. Follow the operating instructions and arrange the specified inspections and servicing.

Core Specializations

Single-basket fryers
MTI-5, MTI-5LV and MTI-10X variants offer different electrical and production configurations. Match the exact unit to counter space and menu demand.
Dual-basket countertop fryers
Mini-C and MTI-40C offer two-basket layouts. Mini-C allows independent operation for made-to-order service; capacities and dimensions differ by model.
Floor-standing fryers
The MTI-40E uses two independently operated frying chambers. Confirm production requirements, electrical supply and installation space for the selected version.
PRO integrated oil filtration
MTI-10X PRO and MTI-40E PRO combine automated frying with integrated oil filtering and replenishment. These oil systems are separate from ventless air filtration.
Oil-maintenance equipment
AutoFilter and OFS provide additional filtration options. Confirm compatibility; OFS is designed for liquid frying oils and must not be used with beef tallow.
Filters, cleaners and replacement parts
Model-specific air filters, cleaning supplies, baskets and service components support maintenance. Match the part to the machine model and serial number.

Filters

Sort by
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old
0 products

Sorry, there are no products in this collection

Sort by
  • Featured
  • Most relevant
  • Best selling
  • Alphabetically, A-Z
  • Alphabetically, Z-A
  • Price, low to high
  • Price, high to low
  • Date, old to new
  • Date, new to old